I am reposting here Lab 12, which was published on ccieflyer.com. Next ticket, Ticket 13, which will be about BGP, will be published on CCIEFlyer.com, then it will be republished here again.
...For more mini labs, have a look at the mini labs page.
Please follow the instructions found here about how to use the lab file.
...For more mini labs, have a look at the mini labs page.
Also have a look at the complete troubleshooting workbook.
We hope that you not only enjoyed the lab, but also learned TS techniques and advance R&S topics.
...Remember that practicing TS, not only good for the TS section, but it also a great tool for sharpening your advance R&S config skills.
...Please stay tuned to this blog for more TS mini labs and other TS/R&S related topic.
I hope that you have enjoyed the lab, and most important also learned in the process about TS and advance R&S topics.
If you want to dive deeper into CCIE R&S troubleshooting and advanaced CCIE R&S topics, you are welcomed to have a look at the TS workbook.
In the following days I’ll publish the list of winners and the solutions.
No students have provided a full solution for the TS Challenge. You still got a good chance to win a free TS and CCIE 2.0 workbook.
...PBR is essentially just a static route with policy.
The following routes are sent from BB4 to R1: 24.24.24.24 /32, 24.24.24.1 /32, 24.24.24.2 /32 and 24.24.24.3 /32 R1 is configured with the following policy for routes coming from BB4:
• R1 should be configured such that R5 does NOT advertise network 24.24.24.2 /32 to R6
• R1 should filter network 24.24.24.1 /32 However, R5 does NOT see network 24.24.24.24 /32 and network 24.24.24.3 /32 that should have come from BB4.
Please follow the instructions found here about how to use the lab file.
...R6 was configured to summarize R3's Lo30,Lo31,Lo32 and Lo33, so R4 would see only one summarized route for them.
...Fix the problem while, making sure R6 sees all R3's routes.
Please follow the instructions found here about how to use the lab file.
...R2 can't ping to R1's Lo0 IPv6 address from all of its interfaces.
...For the solution Click here
Just finished our Troubleshooting labs, I partnered with a VERY GOOD FRIEND OF MINE CALLED Dan Shechter, what a gentleman, a Triple CCIE with unbelievable amount of knowledge. ... We thought that each lab was going to take 5.5 hours to complete but they will take 8 hours each. ... They cover all aspect of CCIE R&S, and ALSO the NEW, YES the NEW “CCIE 2.0 Protocol specific Mock labs” hahahaha, these labs are really tough, I should put a warning and a disclaimer on the bottom of each page, guaranteed to frustrate the best of us.