Archive

Category Archives for "Denise Fishburne"

Setting Up Addressing and Routing: FTDv Fun

In my previous blog (Fun in the Lab: FTDv & FMC – Install and Deploy) we deployed a FMC VM and a FTDv VM and ended the blog with the FTDv successfully added to the FMC.

Now?  Now let’s add IP addressing for the FTDv and also set up routing protocol neighbor relationships.  I learned what I am about to show you from my co-worker and friend, Keith Brister.  So don’t thank me, thank Keith.  🙂

I tossed together a ~29 minute YouTube.  Obviously you can watch the entire thing.  Or… here you go for the big sections.

Done and Done.  Easy Peasy!

 

Fun in the Lab: FTDv & FMC – Install and Deploy

This is my Stealthwatch playground…. errrr… I mean … ahem… “work environment” for a Technical Solution Workshop I am working on for Stealthwatch.

Going to set up FTDv and FMC today.  A co-worker and friend, Scott Barasch, helped me get jump started… so figure I’ll pass on what I just learned to you. 🙂

What this blog will cover is

  1. DEPLOY
    1. Deploying the OVF for FTDv
    2. Deploying the OVF for FMC
  2. VMware settings
    1. Tweak for FTDv
    2. Tweak for FMC
  3. Prepping to Power On
    1. Snapshot Both Before Power On
    2. Power Both On
  4. Setup via Console
    1. FMC – console in and setup IP address
    2. FTDv – console in and step thru the prompts
  5. Test IP Connectivity
    1. Ping FMC and FTDv from the PC
    2. Notice Can’t ping FTDv
    3. Fix
    4. Ping
  6. Browse into FMC
    1. Change password
    2. Setup DNS
    3. Setup NTP
    4. Accept EULA
    5. Apply
  7. LICENSING
    1. License FMC
  8. FMC/FTDv: Make the Connection
    1. FTDv – Point FTDv to FMC
    2. FMC – bring the FTDv into the fold.  🙂

 

So let’s begin.  What I have to host my FMC & FTDv VMs is a UCS M4 with a NIC connected to a Cat4948 in vlan 1.  That NIC is tied to vSwitch0 in the UCS. Continue reading

1 2 3 52