Network Automation 101: Featured Webinar in February 2017

The featured webinar in February 2017 is the Network Automation 101 webinar, and the featured video describes the reasons you should be interested in network automation, its basics, and the difference between automation and orchestration.

Video: Simplify BGP Configurations

Running BGP instead of an IGP in your leaf-and-spine fabric sounds like an interesting idea (particularly if your fabric is large). Configuring a zillion BGP knobs on every box doesn’t.

However, BGP doesn’t have to be complex. In the Simplify BGP Configurations video (part of leaf-and-spine fabric designs webinar) Dinesh Dutt explains how you can make BGP configurations simple and easy-to-understand.

The Unintended Consequences of NSSA Kludges

Remember the kludges needed to make OSPF NSSA areas work correctly? We concluded that saga by showing how the rules of RFC 3101 force a poor ASBR to choose an IP address on one of its OSPF-enabled interfaces as a forwarding address to be used in Type-7 LSA.

What could possibly go wrong with such a “simple” concept?

New Webinar: Automating Network Services

In the next session of Network Automation Use Cases webinar (on Thursday, February 16th) I’ll describe how you could implement automatic deployment of network services, and what you could do to minimize the impact of unintended consequences.

If you attended one of the previous sessions of this webinar, you’re already registered for this one, if not, visit this page and register.

And This Is Why Relying on Linux Makes Sense

Most networking operating systems include a mechanism to roll back device configuration and/or create configuration snapshots. These mechanisms usually work only for the device configuration, but do not include operating system images or other components (example: crypto keys).

Now imagine using RFC 1925 rule 6a and changing the “configuration rollback” problem into “file system snapshot” problem. That’s exactly what Cumulus Linux does in its newest release. Does it make sense? It depends.

Updated: Using Ansible Playbooks with Cisco VIRL

Some of the engineers building Ansible-with-VIRL lab in my Building Network Automation Solutions online course experienced interesting challenges, so I made the how-to instructions more explicit and added a troubleshooting section to the Using Ansible Playbooks with Cisco VIRL document. Hope you’ll find them useful.

Linux Networking Update from NetDev Conference on Software Gone Wild

When I recorded the first podcast with Thomas Graf we both found it so much fun that we decided to do it again. Thomas had attended the NetDev 1.2 conference so when we met in November 2016 we warmed up with What’s NetDev and then started discussing the hot new networking stuff being added to Linux kernel:

Why OSPF Needs Forwarding Address with NSSA Areas

In the previous blog posts I described how OSPF tries to solve some broken designs with Forwarding Address field in Type-5 LSA – a kludge that unnecessarily increases the already too-high complexity of OSPF.

NSSA areas make the whole thing worse: OSPF needs Forwarding Address in Type-5 LSAs generated from Type-7 LSAs to ensure optimal packet forwarding. Here’s why:

Managing Network Services Configuration with Ansible

In the last few weeks I’ve seen numerous questions along the lines of “how do I manage VLANs on my switch with Ansible”. You can look at this question from two perspectives: the low-level details (which modules do I use, how do I push commands to the box…) or the high-level challenges (how do I make sure actual device state matches desired device state). Obviously I’m interested in the latter.

Why Are High-Speed Links Better than Port Channels or ECMP

I’m positive I’ve answered this question a dozen times in various blog posts and webinars, but it keeps coming back:

You always mention that high speed links are always better than parallel low speed links, for example 2 x 40GE is better than 8 x 10GE. What is the rationale behind this?

Here’s the N+1-th answer (hoping I’m being consistent):

Increasing SDDC Visibility

In Episode 69 of Software Gone Wild we discussed ways of increasing visibility into VXLAN transport fabric. Another thing we badly need is visibility into the virtual edge behavior, and to help you get there Iwan Rahabok created a set of vRealize dashboards that include the virtual edge networking components. Hope you’ll find them useful.

To Drop or To Delay, That’s the Question on Software Gone Wild

A while ago I decided it's time to figure out whether it's better to drop or to delay TCP packets, and quickly figured out you get 12 opinions (usually with no real arguments supporting them) if you ask 10 people. Fortunately, I know someone who deals with TCP performance for living, and Juho Snellman was kind enough to agree to record another podcast.

OSPF Forwarding Address YAK: Take 2

In my initial OSPF Forwarding Address blog post I described a common Forwarding Address (FA) use case (at least as preached on the Internet): two ASBRs connected to a single external subnet with route redistributing configured only on one of them.

That design is clearly broken from the reliability perspective, but are there other designs where OSPF FA might make sense?

Using Ansible Networking Modules

One of the engineers attending my Building Network Automation Solutions online course got the lab up and running, wanted to execute a simple IOS command from an Ansible playbook and failed.

He quickly realized he needs to set connection to local; for more details read this article on my automation web site or watch the Ansible for Networking Engineers webinar.

New Webinar: PowerShell for Networking Engineers

Ansible (or Python+Paramiko/Netmiko) seems to be the tool used in most do-it-yourself network automation presentations and videos. Did you know there’s a scripting/automation alternative that’s hugely popular in parts of sysadmin and virtualization universe that almost nobody talks about in networking (because everyone is focused on huge data center fabrics and unicorns) – PowerShell (now also available on OSX and Linux).

Never Take Two Chronometers to Sea

One of the quotes I found in the Mythical Man-Month came from the pre-GPS days: “never go to sea with two chronometers, take one or three”, and it’s amazing the networking industry (and a few others) never got the message.

Linux CLI for Networking Engineers

One would think that we're the only ones struggling with Linux CLI (read: bash). Seems like cyber security professionals might be in the same boat according to the nice summary of dozens of Linux/bash commands collected by Robert Graham.

Multi-Host Container Networking

Running Linux containers on a single host is relatively easy. Building private multi-tenant networks across multiple hosts immediately creates the usual networking mess.

Fortunately the Socketplane team did a pretty good job; for more details watch the video from Docker Networking Fundamentals webinar or listen to the podcast I did with them a year ago.

OSPF Forwarding Address: Yet another Kludge

One of my readers sent me an interesting NSSA question (more in a future blog post) that sent me chasing for the reasons behind the OSPF Forwarding Address (FA) field in type-5 and type-7 LSAs.

This is the typical scenario for OSPF FA I was able to find on the Internet:

New Webinar: Automating Data Center Fabric Deployments

The next session of the Network Automation Use Cases series will take place on January 24th. Dinesh Dutt will explain describe how you can use Ansible and Jinja2 to automate data center fabric deployments, and I’ll have a few things to say about automating network security.

If you think that what Dinesh will talk about applies only to startups you’re totally wrong. UBS is using the exact same approach to roll out their new data centers; Thomas Wacker will share the details in his guest presentation in the next Building Next-Generation Data Centers online course.