IPv6 Addressing on Point-to-Point Links

One of my readers sent me this question:

In your observations on IPv6 assignments, what are common point-to-point IPv6 interfaces on routers? I know it always depends, but I’m hearing /64, /112, /126 and these opinions are causing some passionate debate.

(Checks the calendar) It’s 2023, IPv6 RFC has been published almost 25 years ago, and there are still people debating this stuff and confusing those who want to deploy IPv6? No wonder we’re not getting it deployed in enterprise networks ;)

Using VLAN and VRF Links in netlab Topologies

I already mentioned the introduction of VRF- and VLAN access links in netlab release 1.5.1. Let’s see how they can simplify your lab topologies.

I always tried to make lab topologies as concise as I could, sometimes cheating using JSON-in-YAML syntax. For example, the topology describing three routers running OSPF could be as simple as this:

module: [ ospf ]
nodes: [ r1, r2, r3 ]
links: [ r1-r2, r2-r3, r3-r1 ]

Let’s unravel that:

ChatGPT Explaining the Need for iSCSI CRC

People keep telling me how well large language models like ChatGPT work for them, so now and then, I give it another try, most often resulting in another disappointment¹. It might be that I suck at writing prompts², or it could be that I have a knack for looking in the wrong places³.

This time⁴ I tried to “figure out⁵” why we need iSCSI checksums if we have iSCSI running over Ethernet which already has checksums. Enjoy the (ChatGPT) circular arguments and hallucinations with plenty of platitudes and no clear answer.

Worth Reading: Was MPLS TE Worth the Effort?

Bruce Davie continues documenting the tradeoffs we had to make in networking, this time with Was MPLS Traffic Engineering Worthwhile? I found this bit particularly familiar:

It wasn’t hard to make a theoretical argument that MPLS-TE could improve network performance and average link utilization, by moving traffic from congested links to uncongested ones. The hard part was proving that it would actually do a better job in practice than the more traditional methods such as using link weights and multipath routing to achieve the same ends.

Video: netlab Topology File

After introducing netlab in the Network Automation Tools webinar, I spent a few minutes describing the structure of the netlab lab topology file.

As always, use the video only as a starting point. For more details, read the netlab documentation (overview, reference guide).

Building a Small Network with ChatGPT

I must be a good prompt engineer – every time I ask ChatGPT something really simple it spews out nonsense. This time I asked it to build a small network with four routers:

I have a network with four Cisco routers (A,B,C,D). They are connected as follow: A-B, B-C, A-D, D-C. Each router has a loopback interface. Create router configurations that will result in A being able to reach loopback interfaces of all other routers.

Here’s what I got back¹:

Here’s an example configuration for the four routers that should allow Router A to reach the loopback interfaces of all other routers:

Should I Care About RPKI and Internet Routing Security?

One of my subscribers sent me this question:

I’m being asked to enter a working group on RPKI and route origination. I’m doing research, listening to Jeff Tantsura, who seems optimistic about taking steps to improve BGP security vs Geoff Huston, who isn’t as optimistic. Should I recommend to the group that the application security is the better investment?

You need both. RPKI is slowly becoming the baseline of global routing hygiene (like washing hands, only virtual, and done once every blue moon when you get new IP address space or when the certificates expire). More and more Internet Service Providers (including many tier-1 providers) filter RPKI invalids thus preventing the worst cases of unintentional route leaks.

DHCP Relaying with Redundant DHCP Servers

Previous posts in this series (DHCP relaying principles, inter-VRFs relaying, relaying in VXLAN segments and relaying from EVPN VRF) used a single DHCP server. It’s time to add another layer of complexity: redundant DHCP servers.

Lab Topology

We’ll use a lab topology similar to the VXLAN DHCP relaying lab, add a second DHCP server, and a third switch connecting the two DHCP servers to the rest of the network.

Turning WiFi into a Thick Yellow Cable

The “beauty” (from an attacker perspective) of the original shared-media Ethernet was the ability to see all traffic sent to other hosts. While it’s trivial to steal someone else’s IPv4 address, the ability to see their traffic allowed you to hijack their TCP sessions without the victim being any wiser (apart from the obvious session timeout). Really smart attackers could go a step further, insert themselves into the forwarding path, and inject extra payload into unencrypted sessions.

A recently-discovered WiFi vulnerability brought us back to that wonderful world.

Kicking the Tires of GitHub Copilot

A friend sent me a video demo of his AI-driven network device configuration proof-of-concept. Before commenting on that idea, I wanted to see how well AI works as an assistant. Once Kristian Larsson mentioned he was using GitHub Copilot, it was obvious what to do next: try it out while working on the next netlab release.

TL&DR:

• It works.
• Some Copilot suggestions are uncannily accurate; others are fishing expeditions.
• It’s bland.

New: High Availability Clusters in Networking

Years ago I loved ranting about the stupidities of building stretched VLANs to run high-availability network services clusters with two nodes (be it firewalls, load balancers, or data center switches with centralized control plane) across multiple sites.

I collected pointers to those blog posts and other ipSpace.net HA cluster resources on the new High Availability Service Clusters page.

netlab Release 1.5.1: VLAN and VRF Links

netlab release 1.5.1 makes it easier to create topologies with lots of VRF- or VLAN access links, or topologies with numerous similar links. It also includes support for D2 diagram scripting language in case you prefer its diagrams over those generated by Graphviz.

Even if you don’t find those features interesting (more about them later), you might want to upgrade to fix a nasty container-related behavior I discovered in recently-upgraded Ubuntu servers.

DHCP Relaying in EVPN VRFs

After figuring out how DHCP relaying works and testing it with VRFs and in VXLAN segments, it seems like a no-brainer to make it work with EVPN.

TL&DR: It works, at least when using Arista vEOS as the relay and Cisco CSR 1000v as the DHCP server.

Lab Topology

We’ll keep using the exact same “physical” topology we used in the VXLAN DHCP relaying lab, add EVPN and BGP to the control-plane cocktail, and put the VXLAN segment into a VRF. We’ll use CSR 1000v as the DHCP server because Cisco IOSv doesn’t support some of the DHCP option-82 sub-options we need.

Worth Reading: The Death of CLI

Jeff McLaughlin wrote a nice blog post on the death of CLI (and why it has been greatly exaggerated):

The GUI-based layout tool [for iOS app development] is going away in favor of UI-as-code! The black screen always comes back!

As I’ve been saying for ages: people optimizing their productivity use CLI.

Video: Sample Kubernetes SDN Implementations

It’s time for another Kubernetes video. After Stuart Charlton explained the Kubernetes SDN architecture, he described architectural approaches of Kubernetes SDN implementations, using Flannel as a sample implementation.

ChatGPT on BGP Routing Security

I wanted to include a few examples of BGP bugs causing widespread disruption in the Network Security Fallacies presentation. I tried to find what happened when someone announced beacon prefixes with unknown optional transitive attributes (which should have been passed without complaints but weren’t) without knowing when it happened or who did it.

Trying to find the answer on Google proved to be a Mission Impossible – regardless of how I structured my query, I got tons of results that seemed relevant to a subset of the search words but nowhere near what I was looking for. Maybe I would get luckier with a tool that’s supposed to have ingested all the world’s knowledge and seems to (according to overexcited claims) understand what it’s talking about.

Studying EVPN to Prepare for a Job Interview

An ipSpace.net subscriber sent me this question:

I am on job hunting. I have secured an interview and they will probably ask me about VxLAN BGP EVPN fabrics. If you have some time, it would be a great help for me if you could tell me 1 or 2 questions that you would ask in such interviews.

TL&DR: He got the job. Congratulations!

What Happened to Leaf Switches with Four Uplinks?

The last time I spent days poring over vendor datasheets collecting information for the overview part of Data Center Fabrics webinar a lot of 1RU data center leaf switches came in two form factors:

• 48 low-speed server-facing ports and 4 high-speed uplinks
• 32 high-speed ports that you could break out into four times as many low-speed ports (but not all of them)

I expected the ratios to stay the same when the industry moved from 10/40 GE to 25/100 GE switches. I was wrong – most 1RU leaf data center switches based on recent Broadcom silicon (Trident-3 or Trident-4) have between eight and twelve uplinks.

DHCP Relaying in VXLAN Segments

After I got the testing infrastructure in place (simple DHCP relay, VRF-aware DHCP relay), I was ready for the real fun: DHCP relaying in VXLAN (and later EVPN) segments.

TL&DR: It works exactly as expected. Even though I had anycast gateway configured on the VLAN, the Arista vEOS switches used their unicast IP addresses in the DHCP relaying process. The DHCP server had absolutely no problem dealing with multiple copies of the same DHCP broadcast relayed by different switches attached to the same VLAN. One could only wish things were always as easy in the networking land.

Worth Reading: Off-Path Firewall with Traffic Engineering

I have blog post ideas sitting in my to-write queue for over a decade. One of them is why would you need a VRF (and associated router) between virtual servers and a firewall?

Andrea Dainese answered at least part of that question in his Off-Path firewall with Traffic Engineering blog post. Enjoy!