Sample Lab: SR-MPLS on Junos and SR Linux

Last week I published a link to Pete Crocker’s RSVP-TE lab, but there’s more: he created another lab using the same topology that uses SR-MPLS with IS-IS to get the job done.

Jeroen Van Bemmel did something similar for SR Linux: his lab topology has fewer devices (plus SR Linux runs in containers), so it’s easily deployable on machines without humongous amount of memory.

Sample Lab: SR-MPLS on Junos and SR Linux

Last week I published a link to Pete Crocker’s RSVP-TE lab, but there’s more: he created another lab using the same topology that uses SR-MPLS with IS-IS to get the job done.

Jeroen Van Bemmel did something similar for SR Linux: his lab topology has fewer devices (plus SR Linux runs in containers), so it’s easily deployable on machines without humongous amount of memory.

Worth Reading: The Network Does Too Much

Tom Hollingsworth published a more eloquent version of what I’ve been saying for ages:

• Complexity belongs to the end nodes;
• Network should provide end-to-end packet transport, not a fix for every stupidity someone managed to push down the stack;
• There’s nothing wrong with being a well-performing utility instead of pretending your stuff is working on unicorn farts and fairy dust.

Obviously it’s totally against the vested interest of any networking vendor out there to admit it.

Worth Reading: The Network Does Too Much

Tom Hollingsworth published a more eloquent version of what I’ve been saying for ages:

• Complexity belongs to the end nodes;
• Network should provide end-to-end packet transport, not a fix for every stupidity someone managed to push down the stack;
• There’s nothing wrong with being a well-performing utility instead of pretending your stuff is working on unicorn farts and fairy dust.

Obviously it’s totally against the vested interest of any networking vendor out there to admit it.

Worth Exploring: Christoph Jaggi’s New Web Site

Christoph Jaggi, the author of Ethernet Encryption webinar and ethernet encryptor market overviews launched a new site in which he collected tons material he created in the past – the network security and news and articles sections are definitely worth exploring.

Worth Exploring: Christoph Jaggi’s New Web Site

Christoph Jaggi, the author of Ethernet Encryption webinar and ethernet encryptor market overviews launched a new site in which he collected tons material he created in the past – the network security and news and articles sections are definitely worth exploring.

Video: Kubernetes Architecture

Yesterday I mentioned the giant glob of complexity called Kubernetes. If you want to slowly unravel it, Kubernetes Architecture video from the excellent Kubernetes Networking Deep Dive webinar by Stuart Charlton is a pretty good starting point.

Video: Kubernetes Architecture

Yesterday I mentioned the giant glob of complexity called Kubernetes (see also more nuanced take on the topic). If you want to slowly unravel it, Kubernetes Architecture video from the excellent Kubernetes Networking Deep Dive webinar by Stuart Charlton is a pretty good starting point.

MTU Settings in Virtual Network Devices

When I finally¹ managed to get SR Linux running with netsim-tools, I wanted to test how it interacts with Cumulus VX and FRR in an OSPF+BGP lab… and failed. Jeroen Van Bemmel quickly identified the culprit: MTU. Yeah, it’s always the MTU (or DNS, or BGP).

I never experienced a similar problem, so of course I had to identify the root cause:

MTU Settings in Virtual Network Devices

When I finally¹ managed to get SR Linux running with netlab, I wanted to test how it interacts with Cumulus VX and FRR in an OSPF+BGP lab… and failed. Jeroen Van Bemmel quickly identified the culprit: MTU. Yeah, it’s always the MTU (or DNS, or BGP).

I never experienced a similar problem, so of course I had to identify the root cause:

Three Dimensions of BGP Address Family Nerd Knobs

Got into an interesting BGP discussion a few days ago, resulting in a wild chase through recent SRv6 and BGP drafts and RFCs. You might find the results mildly interesting ;)

BGP has three dimensions of address family configurability:

• Transport sessions. Most vendors implement BGP over TCP over IPv4 and IPv6. I’m sure there’s someone out there running BGP over CLNS¹, and there are already drafts proposing running BGP over QUIC².
• Address families enabled on individual transport sessions, more precisely a combination of Address Family Identifier (AFI) and Subsequent Address Family Identifier.
• Next hops address family for enabled address families.

Three Dimensions of BGP Address Family Nerd Knobs

Got into an interesting BGP discussion a few days ago, resulting in a wild chase through recent SRv6 and BGP drafts and RFCs. You might find the results mildly interesting ;)

BGP has three dimensions of address family configurability:

• Transport sessions. Most vendors implement BGP over TCP over IPv4 and IPv6. I’m sure there’s someone out there running BGP over CLNS¹, and there are already drafts proposing running BGP over QUIC².
• Address families enabled on individual transport sessions, more precisely a combination of Address Family Identifier (AFI) and Subsequent Address Family Identifier.
• Next hops address family for enabled address families.

More: Hardware Differences between Routers and Switches

Aaron Glenn sent me his thoughts on hardware differences between routers and switches based on the last paragraph of Dmytro Shypovalov’s views on the topic

To conclude, what is the difference between routers and switches in my opinion? I have absolutely no idea.

More: Hardware Differences between Routers and Switches

Aaron Glenn sent me his thoughts on hardware differences between routers and switches based on the last paragraph of Dmytro Shypovalov’s views on the topic

To conclude, what is the difference between routers and switches in my opinion? I have absolutely no idea.

Sample Lab: RSVP TE on Junos

It’s amazing how creative networking engineers become once they have the basic tools to get the job done a bit quicker. Last week Pete Crocker published the largest topology I’ve seen built with netsim-tools so far: a 13-router lab running RSVP TE to transport IP traffic between external autonomous systems¹.

Sample Lab: RSVP TE on Junos

It’s amazing how creative networking engineers become once they have the basic tools to get the job done a bit quicker. Last week Pete Crocker published the largest topology I’ve seen built with netlab so far: a 13-router lab running RSVP TE to transport IP traffic between external autonomous systems¹.

Video: Machine Learning Techniques

After Javier Antich walked us through the AI/ML hype and described the basics of machine learning it was time for a more thorough look at:

• Machine learning techniques, including unsupervised learning (clustering and anomaly detection), supervised learning (regression, classification and generation) and reinforced learning
• Machine learning implementations, including neural networks, deep neural networks and convolutional neural networks.

Video: Machine Learning Techniques

After Javier Antich walked us through the AI/ML hype and described the basics of machine learning it was time for a more thorough look at:

• Machine learning techniques, including unsupervised learning (clustering and anomaly detection), supervised learning (regression, classification and generation) and reinforced learning
• Machine learning implementations, including neural networks, deep neural networks and convolutional neural networks.

Introducing netsim-tools Plugins

Remember the BGP anycast lab I described in December 2021? In that blog post I briefly mentioned a problem of extraneous IBGP sessions and promised to address it at a later date. Let’s see how we can fix that with netsim-tools plugin.

We always knew that it’s impossible to implement every nerd knob someone would like to have when building their labs, and extending the tool with Python plugins seemed like the only sane way to go. We added custom plugins to netsim-tools release 1.0.6, but I didn’t want to write about them because we had to optimize the internal data structures first.

Introducing netlab Plugins

Remember the BGP anycast lab I described in December 2021? In that blog post I briefly mentioned a problem of extraneous IBGP sessions and promised to address it at a later date. Let’s see how we can fix that with a netlab plugin.

We always knew that it’s impossible to implement every nerd knob someone would like to have when building their labs, and extending the tool with Python plugins seemed like the only sane way to go. We added custom plugins to netlab in late 2021, but I didn’t want to write about them because we had to optimize the internal data structures first.