Port mirroring is a very valuable troubleshooting tool. Cisco calls this SPAN, and it’s pretty easy to do. Cisco’s NX-OS platform does it a little differently than traditional IOS, so I wanted to briefly post a walkthrough.
First, you have to set up the monitor session and configure source and destination interfaces:
switch(config)# monitor session 1 switch(config-monitor)# source int port-channel 2 both switch(config-monitor)# source int port-channel 3 both switch(config-monitor)# destination interface ethernet 1⁄7 switch(config-monitor)# no shut switch(config-monitor)#
I found a bug in the vHBA Template creation screen on Cisco UCS 2.0.
It’s not too bad, but still a little annoying, and can cause you to have some problems depending on how you have your VSANs set up.
If you notice, the default VSAN is selected for my vHBA template. I have named my VSANs “fabric-a” and “fabric-b”. If I drop down the VSAN selector, I have the ability to select the VSAN I have associated with fabric A:
Cisco switches (and the vast majority of other vendors) ship their switches with all ports in the enabled state. This allows someone with no networking background to plug stuff in, the switch starts learning MAC addresses, and everything works just fine. Sometimes it’s necessary from a security perspective to change this default behavior, so the network engineer is forced to “no shut” every port he or she wishes to use.
My time lately has been just blasted. I’m being placed into new projects with a large company that involves just about every technology found in a datacenter, and as a result, my spare time is….nonexistent.
My knowledge levels in many areas continues to increase, and my need to spew some of it onto the internet in the form of helpful posts, or opinions is not quenched, but unfortunately I do not have a ton of time to dedicate to full-on blog posts during the week.
I was recently asked whether or not I preferred to use a router redundancy protocol like HSRP, VRRP, or GLBP, or stack switches together to form a sort of “virtual router”, and use that for redundancy. Just like anything else, the immediate answer is “it depends”, but there are a few things to remember when considering a redundant design with your routers or Layer 3 switches.
First, redundancy protocols can be found nearly everywhere.
First, I’d like to thank you all for continuing to read my thoughts these last few weeks. Some already know that I passed the CCNP ROUTE exam this past weekend, and that has slowed my ability to write consistently. Fortunately, I laid that beast of an exam to rest and I get to focus on bigger, better things.
I’ve been working a project for the past few weeks that’s involved the integration of HP and Cisco networking equipment.
I recently listened to Packet Pushers Show 72 on “How we are killing the internet” and want to voice my thoughts on the topics discussed.
The majority of the conversation circled around IPv6 adoption, and the state of the internet in light of the existence of tunneling mechanisms being used. Ivan mentioned that we are destroying the internet with all the tunnels (PPPoE, PPPoA, 6to4, 4to6, 6rd, etc) and translation points.
I recently listened to Packet Pushers Show 72 on “How we are killing the internet” and want to voice my thoughts on the topics discussed.
The majority of the conversation circled around IPv6 adoption, and the state of the internet in light of the existence of tunneling mechanisms being used. Ivan mentioned that we are destroying the internet with all the tunnels (PPPoE, PPPoA, 6to4, 4to6, 6rd, etc) and translation points.
I had heard of CloudShark a while back but was reminded of it by a recent Packet Pushers article. For those that haven’t, CloudShark is a new product that basically claims to be a cloud-based capture file (such as from Wireshark) archiving solution. Viewing the main CloudShark website, you’ll be unable to miss what is obviously their big pull - CLOUDSHARK BRINGS YOUR CAPTURE FILES TO THE CLOUD OMGZ!!! (Did the fact that those words are at the top of each page on their site not give away their enthusiasm?
I was able to watch a good chunk of the morning session of the OpenFlow Symposium in San Jose. The stream was having issues at the beginning of the afternoon session, plus I was pulled away for other issues, so I was only able to watch the morning session. I’d like to provide a bit of a write-up from what I was able to catch, and point out some of the highlights that I took interest in from the day’s speakers.
I was able to watch a good chunk of the morning session of the OpenFlow Symposium in San Jose. The stream was having issues at the beginning of the afternoon session, plus I was pulled away for other issues, so I was only able to watch the morning session. I’d like to provide a bit of a write-up from what I was able to catch, and point out some of the highlights that I took interest in from the day’s speakers.
I’ve been trying to get more into networking message boards like Networking Forum and TechExams.net lately. It’s a great way to get in touch with fellow packet lovers and gain some interesting perspectives along the way. In fact, it’s great for anyone in networking, whether you’re a hardened veteran or a newbie - there’s usually a place for you in at least one of these sites. As a result, I’ve seen quite a few posts asking about fundamental concepts, which is great because it shows that new networkers are getting out there and learning new things proactively.
I’ve been trying to get more into networking message boards like Networking Forum and TechExams.net lately. It’s a great way to get in touch with fellow packet lovers and gain some interesting perspectives along the way. In fact, it’s great for anyone in networking, whether you’re a hardened veteran or a newbie - there’s usually a place for you in at least one of these sites. As a result, I’ve seen quite a few posts asking about fundamental concepts, which is great because it shows that new networkers are getting out there and learning new things proactively.
Partial Mesh [pahr-shuhl mesh] noun
A type of networking where each node must not only capture and disseminate its own data, but also serve as a _relay_ for other nodes, that is, it must collaborate to propagate the data in the network.
What happens to your screen doors when you get cats
Image and definition credit: Wikipedia
Like most others that start tinkering with IPv6, I quickly learned that there was no such thing as broadcasts on v6 networks. Since I thought that was a pretty revolutionary concept, I started thinking about all the protocols that until now have relied upon the ability to send via broadcast. The first that came to mind was ARP, which resolves known IP addresses to unknown MAC addresses by sending to the Layer 2 broadcast address of FF:FF:FF:FF:FF:FF.
Like most others that start tinkering with IPv6, I quickly learned that there was no such thing as broadcasts on v6 networks. Since I thought that was a pretty revolutionary concept, I started thinking about all the protocols that until now have relied upon the ability to send via broadcast. The first that came to mind was ARP, which resolves known IP addresses to unknown MAC addresses by sending to the Layer 2 broadcast address of FF:FF:FF:FF:FF:FF.
I’m currently working on a project that, among other things, involves the installation of two Catalyst 6509 switches. I was recently shown a redundancy feature that I had never heard of before called Virtual Switching System (VSS). The more I looked at it, the cooler it was.
The main reason for VSS is something that is typically addressed when there are redundant routing platforms on a network. There are actually quite a few solutions that can be used in the presence of redundant devices, such as the popular and Cisco-proprietary Hot Standby Router Protocol (HSRP), or the IETF open standard Virtual Router Redundancy Protocol (VRRP).
Hello.
Let me begin by saying you have arrived.
Pardon me, where are my manners? I am CiscoMan - the comforting presence at the top of a large number of Cisco documents such as configuration and installation notes for Catalyst switches.
I’m here to tell you that everything is going to be alright - that it’s okay to be scared. CiscoMan is here to help you out.
Believe me, you’re not my first.
Keeping It Classless