HP Route Preference (Administrative Distance)
When building networks leveraging a variety of products you need to consider interoperability and configuration consistency. When leveraging HP A-Series switches in a Cisco environment considerations need to be made in regards to administrative distance (Cisco's term) or route preference (HP's term). In order to ensure that you maintain consistent behavior it is recommended that you modify one or the other and make them consistent with each other. I would recommend following Cisco's administrative preference instead of HP's route preference.HP's default route preference
Cisco's default administrative distance
Don't get caught with unexpected routing behaviors. Have fun!
What The Heck Is F5 Networks’ TMOS?
F5 Network’s Traffic Management Operating System (TMOS) is, first and foremost and for the sake of clarity, NOT an individual operating system. It is the software foundation for all of F5’s network or traffic (not data) products; physical or virtual. TMOS almost seems to be a concept rather than a concrete thing when you first try […]
Author information
The post What The Heck Is F5 Networks’ TMOS? appeared first on Packet Pushers Podcast and was written by Steven Iveson.
Show 144 – Open EIGRP with Russ White + Cisco’s Donnie Savage
EIGRP is a distance vector routing protocol that for many years was unique to Cisco networking environments. Created and championed by Cisco, it didn’t get any traction in the standards bodies in the early days, because there were already enough interior gateway routing protocols around according to some. EIGRP just didn’t interest enough of the […]
Author information
The post Show 144 – Open EIGRP with Russ White + Cisco’s Donnie Savage appeared first on Packet Pushers Podcast and was written by Ethan Banks.
IOS X-Treme!
Originally posted on The Networking Nerd:As a nerd, I’m a huge fan of science fiction. One of my favorite shows was Stargate SG-1. Inside the show, there was a joke involving an in-universe TV program called “Wormhole X-Treme” that…
[Virtual Routing] Part 2 – FHRP Issues in VMware vSphere
I was working on a topology for another post regarding interoperability between the recently released Cisco Cloud Services Router (CSR 1000v) and Vyatta when I ran into an issue regarding vSphere network security policies and First Hop Redundancy Procotols (FHRP) such as VRRP. This post will serve as a precursor to that overall post, but I want to point out a key configuration piece when performing redundant gateways with a FHRP like VRRP.[Virtual Routing] Part 2 – FHRP Issues in VMware vSphere
I was working on a topology for another post regarding interoperability between the recently released Cisco Cloud Services Router (CSR 1000v) and Vyatta when I ran into an issue regarding vSphere network security policies and First Hop Redundancy Procotols (FHRP) such as VRRP. This post will serve as a precursor to that overall post, but I want to point out a key configuration piece when performing redundant gateways with a FHRP like VRRP.[Virtual Routing] Part 2 – FHRP Issues in VMware vSphere
I was working on a topology for another post regarding interoperability between the recently released Cisco Cloud Services Router (CSR 1000v) and Vyatta when I ran into an issue regarding vSphere network security policies and First Hop Redundancy Procotols (FHRP) such as VRRP. This post will serve as a precursor to that overall post, but I want to point out a key configuration piece when performing redundant gateways with a FHRP like VRRP.Cisco Nexus – Port “Inactive” Status
Quick notes on the “inactive” port status seen on the Cisco Nexus platform, which was perplexing the first time I ran into it. This isn’t a new status, existing on a variety of Cisco platforms for a long time now. As it happens, I’ve just not seen it that often historically. In dealing with the […]
Author information
The post Cisco Nexus – Port “Inactive” Status appeared first on Packet Pushers Podcast and was written by Ethan Banks.
Packet Design Appoints Matt Sherrod as Vice President of Product Management
Company Snags Network Management Expert and Industry Veteran
SANTA CLARA, CA — April 16, 2013 — Packet Design, the leading provider of IP network route analytics software, announced today that it has hired Matt Sherrod as Vice President of Product Management. Sherrod will lead product strategy, product design and integrated partner solutions to expand the Packet Design product portfolio and deliver a best-in-class customer experience.
Sherrod has more than 25 years of networking experience. He joins Packet Design from CA Technologies where, as the Vice President of Product Management, he defined product direction and strategy for the company’s infrastructure management solutions. Over the last 10 years he has held a number of field and management positions at CA Technologies and NetQoS. Prior to joining NetQoS, Matt worked as Director of Communications for a Fortune 100 global enterprise, applying leading edge technologies to improve application delivery.
“Matt Sherrod has a deep understanding of customer needs coupled with years of experience in defining and delivering innovative network performance management products to address them,” said Scott Sherwood, CEO of Packet Design. “He is uniquely qualified to lead Packet Design’s product strategy and ensure we provide world-class management solutions for complex service provider and Continue reading
[Virtual Routing] Part 1 – CSR 1000v First Glance
As some of you have heard, the Cisco Cloud Services Router (CSR) 1000v has recently been released for download, and I quite literally pounced on it when I first heard the word. For those that haven’t heard, the CSR 1000v is essentially Cisco’s answer to the problem that has existed in datacenters for a while - that the current multi-tenancy mechanisms, especially overlays like VXLAN and yes, even NVGRE, are just not cutting it for everyone.[Virtual Routing] Part 1 – CSR 1000v First Glance
As some of you have heard, the Cisco Cloud Services Router (CSR) 1000v has recently been released for download, and I quite literally pounced on it when I first heard the word. For those that haven’t heard, the CSR 1000v is essentially Cisco’s answer to the problem that has existed in datacenters for a while - that the current multi-tenancy mechanisms, especially overlays like VXLAN and yes, even NVGRE, are just not cutting it for everyone.[Virtual Routing] Part 1 – CSR 1000v First Glance
As some of you have heard, the Cisco Cloud Services Router (CSR) 1000v has recently been released for download, and I quite literally pounced on it when I first heard the word. For those that haven’t heard, the CSR 1000v is essentially Cisco’s answer to the problem that has existed in datacenters for a while - that the current multi-tenancy mechanisms, especially overlays like VXLAN and yes, even NVGRE, are just not cutting it for everyone.KIClet: SDN – Pick Your Poison
I keep having to remind myself that SDN is more about solving a policy problem than a transport problem. This is why the answer to the question “Will SDN solve all of our networking problems?” is always NO. Truth be told, SDN has been around for a while (see SNMP, Perl, Netconf) in various forms, but it’s receiving a lot of attention right now because the mechanisms are starting to mature and frankly, the networking industry hasn’t really seen a lot of groundbreaking innovations lately.KIClet: SDN – Pick Your Poison
I keep having to remind myself that SDN is more about solving a policy problem than a transport problem. This is why the answer to the question “Will SDN solve all of our networking problems?” is always NO. Truth be told, SDN has been around for a while (see SNMP, Perl, Netconf) in various forms, but it’s receiving a lot of attention right now because the mechanisms are starting to mature and frankly, the networking industry hasn’t really seen a lot of groundbreaking innovations lately.The Route to Null0 is OK
Back to the basics today. I have seen this pop up a few times and wanted to offer some clarification on what seems to be a cloudy issue for CCNP (and some CCIE) candidates. I’ve seen quite a few times now where engineers see a route to Null0 in a Cisco router and assume instantly that the router is “black holing” traffic. Sometimes, a route to Null0 is inserted into the routing table when performing summarization with nearly every routing protocol in common use today.The Route to Null0 is OK
Back to the basics today. I have seen this pop up a few times and wanted to offer some clarification on what seems to be a cloudy issue for CCNP (and some CCIE) candidates. I’ve seen quite a few times now where engineers see a route to Null0 in a Cisco router and assume instantly that the router is “black holing” traffic. Sometimes, a route to Null0 is inserted into the routing table when performing summarization with nearly every routing protocol in common use today.KIClet: SDN – Pick Your Poison
I keep having to remind myself that SDN is more about solving a policy problem than a transport problem. This is why the answer to the question “Will SDN solve all of our networking problems?” is always NO. Truth be told, SDN has been around for a while (see SNMP, Perl, Netconf) in various forms, but it’s receiving a lot of attention right now because the mechanisms are starting to mature and frankly, the networking industry hasn’t really seen a lot of groundbreaking innovations lately.OSPF on PE-CE Links and the Understanding the Down Bit
This post represents the solution and explanation for quiz-10. It describes the functionality of the Down Bit in preventing routing loops in your network.
Fighting Stale Documentation
In my continuing series on the decidedly boring, I would like to discuss the subtle, yet paralyzing, evil of stale documentation. In my experience, stale documentation can be useful or it can be disastrous, depending on how much is wrong. Personally, when I see more than a couple of tiny mistakes in a diagram, spreadsheet, […]
Author information
The post Fighting Stale Documentation appeared first on Packet Pushers Podcast and was written by Keith Tokash.
My Problem
Do you know what my problem is?250 million people in Indonesia, and there are only about 160 CCIEs.
I'm not saying the whole population must become CCIE or must learn about computer networking. But think about how many networks are there in Indonesia:
We have 7 mobile operators.
We have more than 100 Internet Service Providers.
We have one mobile operator with more than 100 million subscribers.
And there are only less than 200 individuals who have reached the expert skill level in IP network technology.
There are many expatriates who currently work in my country. We don't need to replace them all with Indonesian professionals. But at least we need to make sure Indonesians have the same level of skill set, and they are given the same opportunity to compete.
I'm thinking that the solution is not to make every network engineer to become CCIE. It has to go beyond that. The solution must transform Indonesia's next generations, young professionals and students, to become globally competitive professionals. To become professionals who possess the complete package from social network, technical skill and soft skill, and extensive experiences.
So they can compete in global market. So they can move around Continue reading