0

Show 193 – Huawei CloudEngine & CloudFabric for the DC + Enterprise – Sponsored

Global telecom giant Huawei continues to grow their substantial networking footprint by pushing into the enterprise and data center spaces with competitive products. In this podcast, Ian Foo, Director for Data Center Products & Solutions Enterprise Global Marketing at Huawei, joins co-hosts Ethan Banks and Greg Ferro in a discussion focused on Huawei’s CloudEngine switches […]

Author information

The post Show 193 – Huawei CloudEngine & CloudFabric for the DC + Enterprise – Sponsored appeared first on Packet Pushers Podcast and was written by Ethan Banks.

0

Cisco IOS – Understanding IGP Network Statements

One of the things that I find both counterintuitive and often misunderstood is the role of the network command in interior gateway protocols. This command is used in the router configuration mode on Cisco devices. While there are some protocol specifics that should be understood, it behaves similarly between RIP, EIGRP and OSPF. The common misconception is that the network statement determines what will be advertised. While it can affect what is being advertised, that is not the direct purpose of this command.

If you have mistakenly thought the network command determines what is being advertised, you’re certainly not alone. We can even find verbiage in the output of “show ip protocols” that lends credibility to this position. Let’s take a look at the following configuration.

In the above example, I have enable EIGRP on all of the interfaces.

R1 Configuration

interface Loopback0
 ip address 1.1.1.1 255.255.255.0
interface Loopback1
 ip address 2.2.2.1 255.255.255.0
interface FastEthernet0/0
 ip address 192.168.1.1 255.255.255.0
router eigrp 1
 network 1.1.1.1 0.0.0.0
 network 2.2.2.1 0.0.0.0
 network 192. Continue reading

0

How to simulate an IPv6 network using the cloonix network simulator

As we work through this tutorial, we will learn how to use the cloonix graph interface to build a simulation scenario that includes two small IPv6 networks connected to each other by two routers via static routes. We will also learn how cloonix saves network topologies and guest virtual machine root filesystems.

The cloonix open-source network simulator uses KVM virtual machines in the simulated network so, in this tutorial, we will demonstrate real Linux router and host configuration procedures.

Procedure summary

First, let’s review the high-level steps we will execute to set up and configure a simulated IPv6 network and then save a network topology and node configurations.

1. Create root filesystems, one for each virtual machine we plan to create in the simulation
2. Create static guest virtual machines with the previously-created root filesystems
3. Connect nodes to create a network topology
4. Configure each node in the simulated network
5. Save the network simulation scenario for future use
6. (Optional) Make changes and save another version of the topology
7. (Optional) Load a saved network simulation scenario

Step 1: Create root filesystems

We intend to create a scenario made up of static root filesystems Continue reading

0

VXLAN MTU vs IP MTU Consideration

 

Audience

This post is for anyone who’s thought about deploying VXLAN on their network and who like me thinks deeply about stuff, to the point of utter confusion, which hit me on a very hot sunny afternoon. The good news with confusion is, once you’ve cracked the issue (normally one’s correct understanding), the clouds clear and the birds sing.

VXLAN

Virtual Extensible Local Area Network functionality is beginning to hit a wide range of vendor devices. VXLAN provides 16 million (and then some) segments for Layer 2 networks. Some organisations, especially those providing cloud infrastructure currently have or will have problems with the number of VLANs available in 12 bits, which is 4096. In that 4096 number, some are not usable either are reserved for certain things like token-ring and platform specific internal communication.

VXLAN is a simple encapsulation method or a tunnel. It encapsulates the original payload in to UDP packets for transit across an IP network and adds another 50 bytes on to the header tax. At a very high level, VXLAN can be deployed in multicast mode and with unicast. Virtual Network IDs (VNIDs) represent VXLAN segment identifiers. In order to gain connectivity, a network construct Continue reading

0

Book Recommendations — Jeff Aiken Series by Mark Russinovich

Last week, I spent a the majority of my commute time listening to a cybercrime novel by Mark Russinovich. This book, Trojan Horse, is the second of three books in the Jeff Aiken Novel series and didn’t disappoint in any way. In the past I read the electronic version of the first book, Zero Day. Whether or not you work in information security, you’ll likely find these books enjoyable. Having some grasp of the reach and dependance on information systems, I find these books are reasonably plausible. I plan to listen to the final installment in the series during my travels this week.

Links

• Zero Day [amazon] and [audible]
• Trojan Horse [amazon] and [audible]
• Rogue Code [amazon] and [audible]

Disclaimer: I have nothing to disclaim about this article. The links shared are not affiliate links and PacketU receives no compensation from Mark Russinovich or the vendors distributing his work.

The post Book Recommendations — Jeff Aiken Series by Mark Russinovich appeared first on PacketU.

0

HPN Scripting on Github

Dear network community, Based on the feedback of Lindsay Hill on my last post I created a HPN Scripting GitHub repository. The repository is completely free with MIT license. After HP ETSS event next week I’ll post my scripts under … Continue reading →

0

Reading a Certification Blueprint

Those studying for certification exams should know what they’re studying for. This is typically found on some sort of syllabus or blueprint. In Cisco parlance, we simply call this the exam blueprint. So those taking ICND1 in hopes of achieving CCENT, would typically research the ICND1 exam blueprint. This is found selecting the link in the Exam Topics section of the exam overview page.

While reading through this type of document, it is important to keep a few things in mind. For example, it is beneficial to continually think about how a vendor may validate knowledge of a particular competency.  It is also important to pay attention to keywords like describe, configure and troubleshoot. The keyword describe would typically indicate only a conceptual understanding is required. Configure or troubleshoot might be used to indicate working proficiency with a technology is expected.

As a candidate assesses a given blueprint, they should think about how they could assess someone else’s knowledge. For example, one might consider the task of hiring a network administrator. How could the understanding of collision domains and broadcast domains be assessed? By thinking in these terms, the challenges that networking vendors face in assessing candidates begins to surface

Looking at a blueprint Continue reading

0

The Open Internet?

I hear the virtues of the “open Internet” being extolled so much these days that I can’t help but wonder what exactly we are referring to. So let’s ask the question. What is an “open” Internet?

0

Brent’s Technology Bookmarks from June

Lots going on in the past couple of months. While current projects have me pretty busy I wanted to share some good reads and interesting developments in the industry. In no particular order: Thats all for now. Have a great weekend.

...

0

Python Sets: Handy for Network Data

My Python-related posts seem to get the most reads, so here's another one!

A problem that comes up fairly often in networking is finding the number of occurrences of unique items in a large collection of data: let's say you want to find all of the unique IP addresses that accessed a website, traversed a firewall, got denied by an ACL, or whatever. Maybe you've extracted the following list from a log file:

1.1.1.1
2.2.2.2
3.3.3.3
1.1.1.1
5.5.5.5
5.5.5.5
1.1.1.1
2.2.2.2
...

and you need to reduce this to:

1.1.1.1
2.2.2.2
3.3.3.3
5.5.5.5

In other words, we're removing the duplicates. In low-level programming languages, removing duplicates is a bit of a pain: generally you need to implement an efficient way to sort an array of items, then traverse the sorted array to check for adjacent duplicates and remove them. In a language that has dictionaries (also known as hash tables or associative arrays), you can do it by adding each item as a key in Continue reading

0

Python Sets: Handy for Network Data

My Python-related posts seem to get the most reads, so here's another one!

A problem that comes up fairly often in networking is finding the number of occurrences of unique items in a large collection of data: let's say you want to find all of the unique IP addresses that accessed a website, traversed a firewall, got denied by an ACL, or whatever. Maybe you've extracted the following list from a log file:

1.1.1.1
2.2.2.2
3.3.3.3
1.1.1.1
5.5.5.5
5.5.5.5
1.1.1.1
2.2.2.2
...

and you need to reduce this to:

1.1.1.1
2.2.2.2
3.3.3.3
5.5.5.5

In other words, we're removing the duplicates. In low-level programming languages, removing duplicates is a bit of a pain: generally you need to implement an efficient way to sort an array of items, then traverse the sorted array to check for adjacent duplicates and remove them. In a language that has dictionaries (also known as hash tables or associative arrays), you can do it by adding each item as a key in Continue reading

0

Interview with David Major, Discussing CLN

During Cisco Live 2014, the Cisco team tracked me down and talked to me about my role and the value of the Cisco Learning Network.

Broadcast live streaming video on Ustream

Links

• CLN Forum Link
• Cisco Learning Network Home

The post Interview with David Major, Discussing CLN appeared first on PacketU.

0

Who Understands Network Statements?

A couple of weeks ago, I asked some questions about an obscure OSPF configuration. I found the scenario fun to write and share. Therefore, I wanted to offer another odd configuration that might challenge readers to think through the resulting behavior of a Cisco device. This particular challenge is a quick and dirty RIP configuration based on the following scenario.

R1 Configuration

interface FastEthernet0/0
 description To Host1
 ip address 10.1.1.1 255.255.255.0
!
interface FastEthernet0/1
 description To R2
 ip address 10.100.100.1 255.255.255.0
!
router rip
 network 10.100.100.0

R2 Configuration

interface FastEthernet0/0
 description To Host2
 ip address 10.2.2.2 255.255.255.0
!
interface FastEthernet0/1
 description To R1
 ip address 10.100.100.2 255.255.255.0
!
router rip
 network 10.100.100.0

Question

Assuming Host1 and Host2 are configured with the appropriate address and default gateway, which following two statements are true?

• Host1 can reach Host2
• Host2 cannot reach Host1
• show run will reveal the configuration above
• show run will reveal differences from what is shown

A question like this can reveal whether or not an individual has experience configuring interior gateway protocols. Those who have worked with IOS will Continue reading

0

Thought: What Facebook Wedge, Cumulus Linux Shows About Network Operating Systems

Facebook develops it's own operating system for switches. This shows that OS's like Cisco's IOS and Juniper's Junos are under attack and devalues those business. The destruction of the software moat means that customers have far more choice for their networks.

The post Thought: What Facebook Wedge, Cumulus Linux Shows About Network Operating Systems appeared first on EtherealMind.

0

Network Management a forgotten art? Part 2!

A while back I wrote a quick article about network management and tools you can rely on. As you could imagine network management is a quite a broad topic and definitely one definitely can talk about till I turn blue. So I figured I would throw out some other interesting considerations when dealing with Network […]

0

HP network scripting

Dear HP Network Community, My name is Dobias van Ingen and I’m working within HP for almost 15 years. I’ve always been in networking and Unix / Linux infrastructures. Currently I’m leading an EMEA pre-sales overlay team with strong technical focus … Continue reading →

0

Classful IP Networks: An Introduction to IP Address Classes

When the concept of subnetting comes up, there is a need to first establish what networks were like before the Internet Standard Subnetting Procedure was introduced in RFC950. Prior to the use of subnet masks, networked devices made assumtions about the network and host portion of the address. This process by which these assumptions is made was defined in RFC791–

Addresses are fixed length of four octets (32 bits). An address
begins with a network number, followed by local address (called the
“rest” field). There are three formats or classes of internet
addresses: in class a, the high order bit is zero, the next 7 bits
are the network, and the last 24 bits are the local address; in
class b, the high order two bits are one-zero, the next 14 bits are
the network and the last 16 bits are the local address; in class c,
the high order three bits are one-one-zero, the next 21 bits are the
network and the last 8 bits are the local address.

If that leaves you a bit confused, you are in the right place. This article works through the concept of the IP Address Class. Readers should gain the understanding required to decipher things Continue reading

0

On Policy in the Data Center: The solution space

(This post was written by Tim Hinrichs and Scott Lowe with contributions from Martin Casado, Peter Balland, Pierre Ettori, and Dennis Moreau.)

In the first part of this series we described the policy problem: ensuring that the data center obeys the real-world rules and regulations that are pertinent to that data center. In this post, we look at the range of possible solutions by identifying some the key features that are important for any solution to the policy problem. Those key features correspond to the following four questions, which we use to structure our discussion.

1. What are the policy sources a policy system must accommodate?
2. How do those sources express the desired policy to the system?
3. How does the policy system interact with data center services?
4. What can the policy system do once it has the policy?

Let’s take a look at each of these questions one at a time.

Policy Sources: The origins of policy

Let’s start by digging deeper into an idea we touched on in the first post when describing the challenge of policy compliance: the sources of policy. While we sometimes talk about there being a single policy for a data center, the reality is Continue reading

0

SDN/NFV: More than Hot Air in the Windy City

SDN/NFV: More than Hot Air in the Windy City

---

by Steve Harriman, VP of Marketing - June 19, 2014

As reported in my last blog post - SDN: Déjà vu all over again? - Packet Design was a gold sponsor of Light Reading’s inaugural Big Telecom Event in Chicago this week. The organizers claim there were about 1,500 registered attendees with two thirds of them representing network operators. There were several really interesting presentations and panel discussions, and I’ve captured four key takeaways here.

  

Cengiz Alaettinoglu prepping to demo the Network Access Broker

SDN is getting the buzz, but NFV is where the early action is. This theme ran through the conference and there was much discussion on the relative merits of SDN vs. NFV and whether they should be implemented simultaneously or separately. While there are clear near-term benefits – including lower capex and faster time to revenue – for operators who virtualize network functions that today run on hardware appliances, most agreed that this is a first step only. To achieve maximum efficiency and flexibility as well as deliver the best customer experience (see below), an SDN-enabled network function virtualization infrastructure (NFVI) is needed in which pools Continue reading

0

EIGRP Redistribution – Default Metrics of Connected and Static Routes

I wanted to do some analysis of the EIGRP topology table last night, so I fired up a small lab. I was especially interested in how external routes appear there and compare to internal entries. Like all good scientific endeavors, the whole thing got derailed when I made a realization.

Here’s the lab I set up. You can ignore the IPv6 info for this exercise.

It’s a simple little thing.  All the networks you see are included in EIGRP 100 for simplicity.  I limited the network statements to 192.0.2.0/24 to keep my options open. I went ahead and added Loopback100 on R3 with an address of 3.3.3.3/32 and added a redistribute connected with a route-map to get the route out in the wild.  Here’s what I had.

R3#show run | section eigrp
router eigrp 100
 redistribute connected route-map RM-REDIST-CONN
 network 192.0.2.0
 no auto-summary
!
route-map RM-REDIST-CONN permit 100
 match interface Loopback100

Alright. All looks good there, so I checked the topology table on R1 and saw it in there as an external and everything.

R1#sh ip eigrp topology 3.3.3.3/32
IP-EIGRP (AS 100): Topology entry for 3.3.3.3/32
  State  Continue reading