VyOS is a community fork of Vyatta, a Linux-based network operating system that provides software-based network routing, firewall, and VPN functionality. The VyOS project was started in late 2013 as a community fork of the GPL portions of Vyatta Core 6.6R1 with the goal of maintaining a free and open source network operating system in response to the decision to discontinue the community edition of Vyatta.
VyOS runs on both physical and virtual platforms. It supports paravirtual drivers and integration packages for virtual platforms. It is completely free and open source.
The aim of the tutorial is to show VyOS installation on Qemu virtual machine and get it working on GNS3.
VyOS Qemu and VirtualBox virtual disks can be downloaded here.
I created a Bash script deploy_vyos for automatic deployment of VyOS to Qemu image. The script downloads stable VyOS ISO image from the Internet, creates Qemu disk and starts Qemu virtual machine with attached ISO image. Then is starts Expect script install_vyos that automatically configure all required configuration options without user intervention.
Just copy both scripts to the same directory, assign run privileges to both scripts with the command below and run the deploy_vyos script.
$ chmod +x Continue reading
“Hey Fish, how good are you at BFD? None of my BFD neighbors will come up.” Two simple sentences and I am “hooked.” I love troubleshooting! Troubleshooting is just a blast for me! It’s like being a Network Detective trying to figure out “whodunit” As I sit down in front of the CLI and the […]
The post Confessions of a Troubleshooting Junkie appeared first on Packet Pushers Podcast and was written by Denise "Fish" Fishburne.
[This post was co-authored by Bruce Davie and Ken Duda]
Almost a year ago, we wrote a first post about our efforts to build virtual networks that span both virtual and physical resources. As we’ve moved beyond the first proofs of concept to customer trials for our combined solution, this post serves to provide an update on where we see the interaction between virtual and physical worlds heading.
Our overall approach to connecting physical and virtual resources can be viewed in two main categories:
The latter topic is something we’ve addressed in some other recent posts (here, here and here) — in this blog we’ll focus more on how we deal with physical devices at the edge of the overlay.
We first started working to design a control plane to terminate network virtualization overlays on physical devices in 2012. We started by looking at the information model, defining what information needed to be exchanged between a physical device and a network virtualization controller such as NSX. To bound the problem space, Continue reading
This was an internal email that I sent to the CloudFlare team about how we are not afraid to throw away old code. We thought it was worth sharing with a wider audience.
Date: Thu, 10 Jul 2014 10:24:21 +0100 Subject: Courage to change things From: John Graham-Cumming To: Everyone Folks, At the Q3 planning meeting I started by making some remarks about how much code we are changing at CloudFlare. I understand that there were audio problems and people may not have heard these clearly, so I'm just going to reiterate them in writing. One of the things that CloudFlare is being brave about is looking at old code and deciding to rewrite it. Lots of companies live with legacy code and build on it and it eventuallybecomes a maintenance nightmare and slows the company down. Over the last year we've made major strides in rewriting parts of our code base so that they are faster, more maintainable, and easier to enhance. There are many parts of the Q3 roadmap that include replacing old parts of our stack. This is incredibly important as it enables us to be more agile and more stable in future. We should feel good Continue reading
Background
I ran into an interesting issue yesterday at work. There is a new video system
being installed, which takes the video output from computers, encodes it and
sends it as multicast to a controller. The controller then displays it on
a video wall. I had been told that the network has to support multicast.
As all the devices were residing in the same VLAN, I did not expect any issues.
However, the system was not able to receive the multicast. At first we expected
it could be the virtual environment and that the vSwitch did not support multicast,
because one server was deployed on the ESX cluster. The topology was this:
Multicast at Layer 2
Before describing the issue, let’s think about how multicast at layer 2 works.
The source will send to a multicast destination IP. This IP is the converted to a
destination MAC address. If the group is 227.0.0.1, this would map to the MAC
address 0100.5e00.0001. Switches forward multicast and broadcast frames to all
ports in a VLAN. This is not effective in the case of multicast as the traffic
may not have been requested by the host connected to Continue reading
In the coming weeks, connectivity to CloudFlare in Australia is going to a new level. As part of CloudFlare’s ongoing upgrades program, we established connections to three new Internet exchanges: the Megaport Internet exchanges in Sydney, Brisbane, and Melbourne. These connections doubled the number of Australian Internet exchanges we reach and marked the first exchanges outside of Sydney that Cloudflare participates in.
When two ISPs peer, they agree to exchange traffic directly between each other rather than sending it a third party. By doing this, both partners avoid congested paths between transit providers, and they avoid paying to ship traffic—it's win-win!
What peering exchanges mean for CloudFlare is that we can significantly increase our service performance to users on ISPs that peer with us. Take Australia for example, for users who are currently on ISPs peering at Megaport, instead of CloudFlare sending traffic to the transit providers of those ISPs, we can now route the traffic directly to them. The result is lower latency, and traffic taking paths that are often less congested.
Low latency is crucial for internet speed due to the nature of TCP, the fundamental protocol on which the internet is built. TCP operates Continue reading
There are three ways to manipulate the interface cost in OSPF. One is very direct, one changes the presentation of the interface, and the other changes the calculations for every interface.
Set the cost of the interface directly – Just give it the number you want. Easy. This is the number OSPF will use in the SPF calculations without doing any math on the interface.
R1(config-if)#ip ospf cost 8482
Set the bandwidth of the interface – The formula that OSPF uses to calculate interface cost is pretty easy to remember – (reference bandwidth) / (interface bandwidth). Changing the interface bandwidth will obviously change the result of the calculation. The same caveat for EIGRP route manipulation holds true here; if you change the bandwidth of the interface, you may affect other things like QoS…or EIGRP, now that I mention it.
R1#sh ip ospf inter brief Interface PID Area IP Address/Mask Cost State Nbrs F/C Fa0/0 1 0 192.0.2.1/24 10 DR 0/0 R1#conf t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int f0/0 R1(config-if)#bandwidth 10 R1(config-if)#do show ip ospf interf brief Interface PID Area IP Address/Mask Cost State Nbrs F/C Fa0/0 1 0 192.0.2.1/24 Continue reading
Tomorrow’s CCIE Routing & Switching Advanced Technologies Class v5 is postponed, as baby 3.0’s shipping date has arrived 
Class will tentatively return the week of July 21st, however I will post more information and updates about workbook changes before that.
In the meantime the current CCIE RSv5 ATC streaming playlist can be found here, and the download playlist can be found here. Some videos are still in post processing and will be posted within the next few days.
Although we’re only in week 47 of the class (or so it seems), we’ve put a huge dent in the overall topic scope so far. You can see our current progress in the overall CCIE RSv5 Expanded Blueprint here. Some of topics that haven’t been covered in the v5 ATC officially yet can be found in the CCIE RSv4 ATC and the RSv4 to RSv5 Transition Technologies addendum at the end of that playlist.
MikroTik RouterOS is the stand-alone operating system of MikroTik RouterBOARD hardware. It can also be installed on a PC and will turn it into a router with all the necessary features – routing, firewall, bandwidth, management, wireless access point, backhaul link, hotspot, gateway, VPN server and more.
RouterOS x86 installed on Qemu and VirtualBox disks is not licensed, you have 24 hours in total to run these images.
login/pass: admin / password is not set
1. RouterOS x86 6.15
Qemu
https://drive.google.com/file/d/0B6L2h6R5UKMhQUcxMFl2a1pZZGs/edit?usp=sharing
http://sourceforge.net/projects/gns-3/files/Qemu%20Appliances/routeros-6.15-qemu.zip/download
http://www.4shared.com/zip/HG7nubJlba/routeros-615-qemu.html
VirtualBox
https://drive.google.com/file/d/0B6L2h6R5UKMhODYyNm0tWnFjXzA/edit?usp=sharingv
http://sourceforge.net/projects/gns-3/files/VirtualBox%20Appliances/routeros-6.15-vbox.zip/download
http://www.4shared.com/zip/qPN2tmD7ba/routeros-615-vbox.html
Collection of useful, relevant or just fun places on the Internets for 9th July 2014 and a bit commentary about what I’ve found interesting about them: Will Software Defined Networking Actually Happen? – Ethan Banks is blogging at cisco.com on SDN: I understand the cynicism. After all, for a long time, networking had lapsed […]
The post Internets of Interest for 9th July 2014 appeared first on EtherealMind.
When you configure OSPF network statements, IOS orders them most-specific to least-specific then does a top-to-bottom match of the interfaces. It doesn’t matter which order you put them in, the configuration will always be ordered with the longest prefix matches first. Lab time!
I have router R1 with these interfaces.
R1#sh ip int brief Interface IP-Address OK? Method Status Protocol FastEthernet0/0 10.0.0.1 YES manual up up FastEthernet0/1 unassigned YES unset administratively down down Loopback100 10.0.101.1 YES manual up up Loopback200 10.2.101.1 YES manual up up
Let’s add the OSPF configuration where 10.0.0.0/8 is in area 2 then check what OSPF thinks is happening.
R1(config)#router ospf 1 R1(config-router)#network 10.0.0.0 0.255.255.255 area 2 ... R1#show ip ospf interface brief Interface PID Area IP Address/Mask Cost State Nbrs F/C Lo100 1 2 10.0.101.1/24 1 LOOP 0/0 Lo200 1 2 10.2.101.1/24 1 LOOP 0/0 Fa0/0 1 2 10.0.0.1/24 10 WAIT 0/0
All the interfaces are in area 2 as expected. Now let’s add 10.0.0.0/16 into area 1 to see what happens.
R1(config-router)#network 10.0.0.0 Continue reading
With the vast marketing budgets from big vendors and their well paid "evangelists", the startups vying to introduce new methods and the clamour of engineers trying to understand new technology it might be time to pause and remember that Software Defined Networking was a customer-driven initiative. Vendors had to be forced to accept that SDN was a necessary change.
The post SDN Started as a Customer Movement (Not a Vendor Innovation) appeared first on EtherealMind.
IETF RFC on the Standards Tracks that talks about the problem of chaining headers in IPv6. I’m getting a sense of deja-vu since this was also has issue with IPv4 and, ultimately, use of chained IPv4 headers died away. If they encounter an unrecognised extension header type, some firewalls treat the packet as suspect and drop it. Unfortunately, […]
The post Response: RFC 7045 – Transmission and Processing of IPv6 Extension Headers appeared first on EtherealMind.
I was pleased as punch to wake up the other day and read Marten Terpstra’s blog post on getting over the fear of using automation to make changes on our network infrastructure. He illuminated a popular excuse that I’ve heard myself on multiple occasions – that automation is great for things like threshold alarms, or pointing out the percieved root cause of a problem, but not actually fixing the problem. The idea is that the problems that occur on a regular basis, or even performing configuration changes in the first place – is a specialized task that a warm-blooded human being absolutely, no-doubt must take total control of in order to be successful.
With the right implementation, this idea is, of course, rubbish. I asked a question on Twitter not too long ago in preparation for a presentation I was about to give. I have a decent amount of experience working with VMware vSphere, and knew there were some experienced server virtualization folks following me, so I asked about a feature that was thought of in similar light not too long ago:
For those running vSphere, do you have DRS enabled and set to something other than manual? If not, why not? Trying Continue reading
Three bricklayers were working side by side. When asked, “What are you doing?” the first bricklayer replied, “I’m laying bricks.” The second bricklayer was asked and he answered, “Feeding my family.” The third bricklayer when asked the question, “What are you doing?” responded, “I’m building a cathedral.”
This story illustrates the power of purpose. In a previous post I suggested that we are all in the customer service business, and I posed some questions to help teams see linkages between what they do and how that impacts customers and the company. The reason this is so important is because purpose leads to employee engagement, which leads to profitability.
To maximize our personal satisfaction and employee engagement, we need three ingredients: purpose, autonomy, and mastery. (See Daniel Pink’s explanation in this video.) As leaders we must work relentlessly to break down barriers to allow our people the freedom to thrive.
To help people understand the purpose of their work, leaders link tasks to outcomes and benefits. Some people see linkages naturally, while others require leaders to communicate Continue reading