Normalizing ACLs to Support Automated Changes

R1(config)#do sh access-list NAT
Extended IP access list NAT
14 deny ip 10.10.1.48 0.0.0.7 10.0.0.0 0.255.255.255
20 deny ip 10.11.1.48 0.0.0.7 10.0.0.0 0.255.255.255
25 permit ip 10.10.1.48 0.0.0.7 192.168.0.0 0.0.255.255
30 permit ip 10.10.1.48 0. Continue reading

How Do You Spell That?

I spent a bit of my career on the phone doing support for a national computer vendor. In addition to the difficulties of walking people through opening the case and diagnosing motherboard issues, I found myself needing to overcome language barriers. While I only have a hint of an accent (or so I’ve been told), spelling out acronyms was a challenge. That’s where the phonetic alphabet comes into play

By now, almost everyone uses the NATO phonetic alphabet. It’s the most recognized in the world. The US joint Army/Navy version varies a bit but does have a lot of similarities. However, when I first started out using the NATO version quite a few callers didn’t know what Lima was or giggled when I said Tango.

I decided that some people have much more familiarity with first names. This was borne out when I kept using Mary for “M” instead of Mike. People immediately knew it. Same for Victor, Peter, and so on. So I cobbled together my own Name Phonetic Alphabet.

A – Adam
B – Barbara
C – Charlie
D – David
E – Edward
F – Frank
G – George
H – Harold
I Continue reading

Does a Cloud Orchestration System Need an Underlying SDN Controller?

A while ago I had an interesting discussion with a fellow SDN explorer, in which I came to a conclusion that it makes no sense to insert an overlay virtual networking SDN controller between cloud orchestration system and virtual switches. As always, I missed an important piece of the puzzle: federation of cloud instances.

2014-11-04 16:48Z: CJ Williams sent me an email with information on SDN controller in upcoming Windows Server release. Thank you!

FREE Ansible Up & Running Preview

Are you camped out at your local bookstore awaiting the release of Ansible Up & Running next year and want something to read? How about the first 3 chapters of the book? 

The free ebook preview of Ansible Up & Running by Lorin Hochstein includes:

Chapter 1 - Introduction
Chapter 2  - Playbooks, a Beginning
Chapter 3 - Inventory: Describing Your Servers

To download your copy in PDF, MOBI and ePUB formats click here or the link below.

Please enter a vaild email address as the ebook preview will be delivered via email.

Wireshark is almost a Native Species on OSX

I must have been living under a deep sea rock or something because I have been running Wireshark for a while now on my Mac and since Mountain Lion was released, it has been necessary to install XQuartz so that … Continue reading →

If you liked this post, please do click through to the source at Wireshark is almost a Native Species on OSX and give me a share/like. Thank you!

The power of Clustering Illusion when managing image

As humans, we are predisposed to finding order out of otherwise random data. When we look at clouds or even a mountain ridge, we find shapes that are familiar to us. When we see data, we instinctively search for patterns to help make sense of what might appear to be random information. It might be our inherent need for understanding. Or maybe we are just programmed to compare things to stuff we already know. Whatever the underlying cause, it’s a powerful trait that virtually all of us share.

Understanding that people want to put information into buckets and draw conclusions, are there things that we can be doing to help manage our own image?

Walking a Vegas game floor

Maybe you have walked a gaming floor in Las Vegas, turning your head as you are assaulted by the lights and noise that accompany the gambling experience. While perusing the various games, have you ever spotted a roulette table and noticed that the last 6 spins have all come up black? The next spin is bound to be red!

Of course we all know that the likelihood of a red on the next spin is statistically the same, regardless of what Continue reading

Cisco free webinars.

Hello my friends. I wish I would not be banned for this advertisement :). I think this might be interesting for packet pushers audience and worth posting. At fisrt legal notice should be written :). All information provided in this post are my subjective understanding of this project. I am not marketing guy, so it […]

Author information

Michał Janowski

I was happy to finish light studies with a specialization active turism :). Than moved to IT world and participated in postgraduate studies which relied upon CCNA exploration course. After that I got my first job in IT as a software tester in Nokia Siemens Networks where I was responsible for verification of code running on radio equipment (3g, LTE). Now, as a Cisco TAC enginner I am helping cutomers resolving problems in their networks. I belong to unit responsible for Catalyst switches, so forgive me as most of my posts would be influenced by the technology I know the best.

LinkedIn

The post Cisco free webinars. appeared first on Packet Pushers Podcast and was written by Michał Janowski.

Riverbed and Big Switch Partner to Accelerate Application-aware SDN Fabrics

The Care and Feeding of a High Maintenance Network

The Care and Feeding of a High Maintenance Network

A network is an organic creation. The minute it’s born, when all new core and edge connections are made and routing is turned up, things begin to change. Many changes are self-driven due to unexpected interactions: Equal Cost Paths (ECMPs), Asymmetric Paths, etc. Other changes are due to the random nature of the Internet and are readily noticeable at the peering points into the newborn network.

Some people think that once the switch is turned on things will just work as designed. I’ve found that is rarely the case. Networks need care and feeding. Tools to check on the processing capacity, resource consumption, and well being of the network and its individual elements are required.

For the monitoring aspect of this “care and feeding,” simple SNMP tools may be used. They are perfectly adequate for tracking and graphing CPU rates, available memory and throughput for connections between network elements. However, when it comes to understanding the network’s routing and traffic patterns, using SNMP-based tools is rarely the best method.

Today’s dynamic IP networks require visibility into what’s happening Continue reading

Root Cause Analysis – It’s Not Perfect

Automated Root Cause Analysis promises a lot. High-end network monitoring systems promise that they can automatically isolate network problems, and only tell you about the thing that needs fixing. This sounds very enticing. Who wants a flood of alarms, when we could get just one alarm, telling us what we need to fix? But it’s not perfect, and you do need to pay attention to it.

Consider this contrived network:

What happens if the upstream link from the router fails?

From the perspective of the NMS, all systems at that site are unreachable. A simple NMS that is unaware of topology will create 4 alarms – one for each of the router, the switches and the server. A smarter NMS will recognise that it only needs one alarm, for the router WAN link being unreachable (and therefore the whole site is offline). It will know that the switches and server are unreachable, but those alarms will be suppressed by the key incident.

This all sounds like a good idea. Why wouldn’t you want that?

But what if the NMS view of the network is incomplete? What might happen then?

Consider the same network as above, but this time a new WAN router has been Continue reading

On choosing VMware NSX or Cisco ACI

Are you stuck in the middle of a battle to choose VMware NSX or Cisco ACI? In this post I’ll attempt to bring some clarity and strategic guidance in first choosing the right path, then propose how the two technologies can co-exist. I’ll start with the message below from a reader asking for my opinion on the matter:

Hi Brad,

I’m involved in a new Data Center networking project where Cisco is proposing the Cisco ACI solution. I am starting to dig-in to the technology, but my immediate “gut reaction” is to use Cisco for a standard Clos-type Leaf and Spine switch network and use NSX for providing Layer 3 to Layer 7 services.

I am interested in hearing your opinion about Cisco ACI versus VMware NSX, since you have worked for both companies. If you have time, it would be great to share your views on this subject.

As you can imagine, this is a highly political discussion and our network team are Cisco-centric and resisting my ideas. We are a VMware/Cisco shop and I want the best fit for our SDDC strategy.

For the sake of discussion, lets assume that your IT organization wants to optimize for better Continue reading

On choosing VMware NSX or Cisco ACI

Are you stuck in the middle of a battle to choose VMware NSX or Cisco ACI? In this post I’ll attempt to bring some clarity and strategic guidance in first choosing the right path, then propose how the two technologies can co-exist. I’ll start with the message below from a reader asking for my opinion on the matter:

Hi Brad,

I’m involved in a new Data Center networking project where Cisco is proposing the Cisco ACI solution. I am starting to dig-in to the technology, but my immediate “gut reaction” is to use Cisco for a standard Clos-type Leaf and Spine switch network and use NSX for providing Layer 3 to Layer 7 services.

I am interested in hearing your opinion about Cisco ACI versus VMware NSX, since you have worked for both companies. If you have time, it would be great to share your views on this subject.

As you can imagine, this is a highly political discussion and our network team are Cisco-centric and resisting my ideas. We are a VMware/Cisco shop and I want the best fit for our SDDC strategy.

For the sake of discussion, lets assume that your IT organization wants to optimize for better Continue reading

On choosing VMware NSX or Cisco ACI

Are you stuck in the middle of a battle to choose VMware NSX or Cisco ACI? In this post I’ll attempt to bring some clarity and strategic guidance in first choosing the right path, then propose how the two technologies can co-exist. I’ll start with the message below from a reader asking for my opinion on the matter:

Hi Brad,

I’m involved in a new Data Center networking project where Cisco is proposing the Cisco ACI solution. I am starting to dig-in to the technology, but my immediate “gut reaction” is to use Cisco for a standard Clos-type Leaf and Spine switch network and use NSX for providing Layer 3 to Layer 7 services.

I am interested in hearing your opinion about Cisco ACI versus VMware NSX, since you have worked for both companies. If you have time, it would be great to share your views on this subject.

As you can imagine, this is a highly political discussion and our network team are Cisco-centric and resisting my ideas. We are a VMware/Cisco shop and I want the best fit for our SDDC strategy.

For the sake of discussion, lets assume that your IT organization wants to optimize for better Continue reading

On choosing VMware NSX or Cisco ACI

Learning NSX, Part 18: Routing Without Network Address Translation

This is part 18 of the Learning NSX blog series, in which I talk about using layer 3 (L3) routing with VMware NSX but without network address translation (NAT). This post describes a configuration that offers yet another connectivity option for OpenStack cloud administrators and operators.

In part 6, I showed you how to add a gateway appliance to your NSX installation. Part 9 leveraged the gateway appliances to create a L3 gateway service, which—as I explained in part 15—provides the functionality for logical routers in OpenStack. (Logical routing was covered in part 14.) Part 16 expanded the routing configuration to support multiple external networks. This post expands the options again by showing you how to do logical routing without using network address translation (NAT). Of course, it would probably be helpful to read the entire series; links to all posts can be found on the Learning NVP/NSX page.

As I mentioned, so far you’ve seen three different external connectivity options:

• Routing (layer 3 connectivity) to a single external network
• Routing (layer 3 connectivity) to multiple external networks using VLANs
• Bridging (layer 2 connectivity) between a logical network and a physical broadcast domain

Both of the routed Continue reading

Cloudflare – An Awesome IPv6 Move – Thank you!

Recently Cloudflare made a pretty cool move, and made their IPv6 services available to all of their customers – even the free ones, like me! So first things first, huge kudos to Cloudflare for offering this up; it has offered … Continue reading →

If you liked this post, please do click through to the source at Cloudflare – An Awesome IPv6 Move – Thank you! and give me a share/like. Thank you!

SDN Job Report – Methods

Ready for that first #SDN job? How many jobs are available out there? Are there jobs with an SDN focus, or simply jobs that include SDN as just one small part of the job? Are SDN jobs really beginning to emerge?

Well, I too am curious about this kind of question. So a while back, I started tracking mentions of SDN on a couple of job sites: Dice.com and Monster.com. For today’s post, I’ll set the stage for how we’ve gathered the data. In the following posts, I’ll show the numbers for the 3^rd quarter 2014.

My Own Ponderings of Searching for “SDN” Jobs

A while back, I was wondering about the job market for networking jobs. We’re in the middle of a time when networking jobs may undergo a lot of change. Our individual preparation for our careers needs to consider both the existing world (where most of today’s jobs still are) and this possible future world with lots of SDN jobs. And I thought, “Wouldn’t it be great if someone would post articles on occasion about emerging SDN-related jobs, and compare that to existing networking jobs.”

And then I wondered if I could do Continue reading

SDN and legacy companies: laggards or pragmatists?

There was an interesting Twitter thread over the weekend initiated by Ethan Banks (@ecbanks). He commented that there was too much technique churn in SDN and NetOps (the networking equivalent of DevOps). His point was that in the face of all the change in how to do things, it left users in an impossible spot. How can up pick up a new technology if the frameworks around how to use it are consistently changing?

His conclusion was that we cannot herd these cats. But what is really going on?

No consensus on operating models

The most basic truth here is that there is no real consensus on operating models around any of the new technology. While there are rough agreements on a few architectural principles (and even there, far more is in the air than well grounded), there is really not a lot of best practices to which companies can pin their operations.

Sure, it might be obvious to people that SDN is here to stay. But what exactly does that mean? And which SDN do I evaluate, purchase, and eventually deploy? Do I go with OpenFlow because ONF has convinced me that openness is the primary tenet? Do I Continue reading

The Degree, or the Certification: First Thoughts

Having just come off doing a presentation on “being a great engineer,” I can tell you what the number one question people asked was: Should I get a degree, or a certification? In fact, several people were irritated that Denise and I were even talking about anything else, because it’s the only question that counts.

Let me counter that thought. If you’re asking whether you should get a degree or a certification, you’re asking the wrong question.

It’s not that I don’t have anything invested in certifications. I hold a CCIE (2635), CCDE (2007:001), and CCAr. I’ve written questions for the CCIE. I was on the original SME team that invented the CCDE and CCAr certifications. I’ve taught certification classes, written certification books, and generally been involved in the certification world for a long time.

It’s not that I don’t have anything invested in college, either. I have one four year degree, two Master’s degrees, and I’m currently working like crazy to gain acceptance into an PhD program (Philosophy, in Apologetics and Culture, if you’re curious). I’ve taught as an adjunct in the NC State MS program, and I’m on Capella University’s advisory council. I teach on a regular basis Continue reading

Simple Bash Ping Script

Been looking for something like this for a while:

http://etherealmind.com/tech-notes-ping-sweep-ip-subnet/

for i in `seq 1 255`; do ping -c 1 192.168.1.$i | tr \n ‘ ‘ | awk ‘/1 received/ {print $2}'; done

I usually use nMAP for this, but in some instances you may not have access to it. For those times, Bash should work really well.