LISP – OMP – BGP EVPN Interoperability – Part IV: BGP EVPN IP Prefix Route (Type 5)
Introduction
Figure 3-1 shows the Overlay Network Control-Plane interaction. Edge-xTR-11 registers reachability information (IP address and location) of EP1 to MapSrv-22. MapSrv-22 stores the information into the Mapping database and then installs it to RIB. Then MapSrv-22 exports the information to the BGP process and sends BGP Update using VPNv4 address format to Border-PxTR-13. Border-PxTR-13 imports NLRI into BRIB and RIB. Then it sends BGP Update to the local SD-WAN edge device vEdge-1. After importing the received information into BRIB and RIB, vEdge-1 exports the information to the OMP process and advertises it over a DTLS connection to vSmart (SD-WAN Control-Plane node). vSmart, in turn, advertises information to remote SD-WAN device vEdge-2. After importing the received information into the RIB, vEdge-2 exports the information to the BGP process and sends BGP Update to Border-Leaf-13. Border-Leaf-13 installs the information into BRIB and RIB. Next, Border-Leaf-13 sends BGP Update message using EVPN route type 5 (IP Prefix Route) to its iBGP peer Spine-1 (BGP Route-Reflector) using auto-generated Route-Target 65030:10077. Spine-1 forwards the BGP Update to Leaf-1, which imports the information into L3VNI used with VRF NWKT and installs the route into the VRF NWKT RIB.
Figure 3-1: Overall Control-Plane Operation.
Continue reading














