0

Using Paw to Launch an EC2 Instance via API Calls

Last week I wrote a post on using Postman to launch an EC2 instance via API calls. Postman is a cross-platform application, so while my post was centered around Postman on Linux (Ubuntu, specifically) the steps should be very similar—if not exactly the same—when using Postman on other platforms. Users of macOS, however, have another option: a macOS-specific peer to Postman named Paw. In this post, I’ll walk through using Paw to issue API requests to AWS to launch an EC2 instance.

I’ll structure this post as a “diff,” if you will, that outlines the differences of using Paw to launch an EC2 instance via API calls versus using Postman to do the same thing. Therefore, if you haven’t already read the Postman post from last week, I strongly recommend reviewing it before proceeding.

Prerequisites

This post assumes you’ve already installed Paw on your macOS system. It also assumes you are somewhat familiar with Paw; refer to the Paw documentation if not. Also, to support AWS authentication, please be sure to install the “AWS Signature 4 Auth Dynamic value” extension (see here or here). This extension is necessary in order to have the API requests sent Continue reading

0

Money Moves: March 2020

Palo Alto paid $420M for CloudGenix; Microsoft acquired Affirmed; AWS pledged $20 million to...

Read More »

0

#mydockerbday Recap + Community Stories

Although March has come and gone, you can still take part in the awesome activities put together by the community to celebrate Docker’s 7th birthday. 

Birthday Challenge

Denise Rey and Captains Łukasz Lach, Marcos Nils, Elton Stoneman, Nicholas Dille, and Brandon Mitchell put together an amazing birthday challenge for the community to complete and it is still available. If you haven’t checked out the hands-on learning content yet, go to the birthday page and earn your seven badges (and don’t forget to share them on twitter).

Live Show

Captain Bret Fisher hosted a 3-hour live Birthday Show with the Docker team and Captains. You can check out the whole thing on Docker’s Youtube Channel, or skip ahead using the timestamps below:

Community Stories

And while many Community Leaders had to cancel in-person meetups due to the evolving COVID 19 situation, they and their communities still showed up and shared their #mydockerbday stories. There Continue reading

0

Altiostar CEO: Open RAN Will Dominate in 3 Years

“In the next three years economic forces will drive operators to go to open RAN," said Altiostar...

Read More »

0

Remote work, regional lockdowns and migration of Internet usage

The recommendation for social distancing to slow down the spread of COVID-19 has led many companies to adopt a work-from-home policy for their employees in offices around the world, and Cloudflare is no exception.

As a result, a large portion of Internet access shifted from office-focused areas, like city centers and business parks, towards more residential areas like suburbs and outlying towns. We wanted to find out just precisely how broad this geographical traffic migration was, and how different locations were affected by it.

It turns out it is substantial, and the results are quite stunning:

Gathering the Data

So how can we determine if Internet usage patterns have changed from a geographical perspective?

In each Cloudflare Point of Presence (in more than 200 cities worldwide) there's an edge router whose responsibility it is to switch Internet traffic to serve the requests of end users in the region.

These edge routers are the network's entry point and for monitoring and debugging purposes each router samples IP packet information regarding the traffic that traverses them. This data is collected as flow records and contains layer-3 related information, such as the source and destination IP address, port, packet size etc.

These statistical Continue reading

0

UPDATE 4-10: How enterprise networking is changing with a work-at-home workforce

As the coronavirus spreads, public and private companies as well as government entities are requiring employees to work from home, putting unforeseen strain on all manner of networking technologies and causing bandwidth and security concerns.  What follows is a round-up of news and traffic updates that Network World will update as needed to help keep up with the ever-changing situation.  Check back frequently!UPDATE 4.17AT&T reported that Email traffic is down 25% as more people opt for phone and video calls.  Video conferencing is on the rise with more than 470k Webex Meeting Calls on April 9, the highest during the COVID-19 pandemic.  It also stated instant messaging, including text traffic from messaging apps and platforms, has slightly declined since the week prior, but overall is up nearly 60%.To read this article in full, please click here

0

APRS

Another post in my burst of amateur radio blog posts.

To say that the documentation for APRS is not great is an understatement. What should be the best source of information, aprs.org, is just a collection of angry rants by the inventor of APRS, angrily accusing implementations and operators of using his invention the wrong way. There’s no documentation about what the right way is, just that everyone is wrong.

So here I’ll attempt to write down what it is, in one place, in an effort to both teach others, and for people who know more than me to correct me.

The best source of APRS information for me has actually been Kenwood radio manuals. See resources at the bottom.

APRS in short

APRS is a way to send short pieces of digital information as packets of data. The messages are:

• Status about you
  • Your position (optionally not exact)
  • Your heading
  • Your QSY (frequency you’re tuned to if someone wants to call)
• Weather reports
• Status about “items” and “objects”. This is objects that are not you, and aren’t a radio. For example where the meeting point is, or a hurricane.
• Short messages

The protocol

As an operator you Continue reading

0

Using Postman to Launch an EC2 Instance via API Calls

As I mentioned in this post on region and endpoint match in AWS API requests, exploring the AWS APIs is something I’ve been doing off and on for several months. There’s a couple reasons for this; I’ll go into those in a bit more detail shortly. In any case, I’ve been exploring the APIs using Postman (when on Linux) and Paw (when on macOS), and in this post I’ll share how to use Postman to launch an EC2 instance via API calls.

Before I get into the technical details, let me lay out a couple reasons for spending some time on this. I’m pretty familiar with tools like Terraform and Pulumi (my current favorite), and I’m reasonably familiar with AWS CLI itself. In looking at working directly with the APIs, I see this as adding a new perspective on how these other tools work. (I’ve found, in fact, that exploring the APIs has improved my usage of the AWS CLI.) Finally, as I try to deepen my knowledge of programming languages, I wanted to have a reasonable knowledge of the APIs before trying to program around the APIs (hopefully this will make the learning curve a bit less Continue reading

0

Daily Roundup: Cisco Vows No Job Cuts

Cisco pledged to preserve jobs; AWS added direct storage to ECS, Fargate; and SAP prepped for...

Read More »

0

Graphing The Coronavirus Pandemic

Since late February and early March, when the coronavirus outbreak began to spill out of China in earnest and spread its sickness and death across Europe, throughout the United States, and into other parts of the globe, IT companies have stepped up to lend their technologies to fight the pandemic. …

Graphing The Coronavirus Pandemic was written by Jeffrey Burt at The Next Platform.

0

Deploy Stateful Docker Containers with Amazon ECS and Amazon EFS

At Docker, we are always looking for ways to make developers’ lives easier either directly or by working with our partners. Improving developer productivity is a core benefit of using Docker products and recently one of our partners made an announcement that makes developing cloud-native apps easier.

AWS announced that its customers can now configure their Amazon Elastic Container Service (ECS) applications deployed in Amazon Elastic Compute Cloud (EC2) mode to access Amazon Elastic File Storage (EFS) file systems. This is good news for Docker developers who use Amazon ECS. It means that Amazon ECS now natively integrates with Amazon EFS to automatically mount shared file systems into Docker containers. This allows you to deploy workloads that require access to shared storage such as machine learning workloads, containerizing legacy apps, or internal DevOps workloads such as GitLab, Jenkins, or Elasticsearch. 

The beauty of containerizing your applications is to provide a better way to create, package, and deploy software across different computing environments in a predictable and easy-to-manage way. Containers were originally designed to be stateless and ephemeral (temporary). A stateless application is one that neither reads nor stores information about its state from one time that it is run Continue reading

0

Zscaler Buys Cloud Security Startup Cloudneeti

Gartner recommends all security vendors invest in cloud security posture management and forecasts...

Read More »

0

Scientists Create a Long-Distance Cryogenic Microwave Quantum Network

There’s been quite a bit of fanfare around quantum computing during the last few years, with experts predicting that quantum computers will help fuel the growing computational demands of artificial intelligence, as well as forming the backbone of an unhackable internet. But beyond the hype is the reality that quantum computers are still some ways from being commercially viable, as researchers continue to resolve issues like accuracy, size and how to build a superconducting electrical oscillators that are used in some quantum chips need to be cooled down to near-absolute zero temperatures, otherwise the problem of Quantum Device Lab at study co-author quantum entanglement, two particles become linked in a way so that whatever happens to one particle, it also immediately occurs to the other, no matter the distance. Having proven that a cryogenically based, long-distance quantum network is indeed possible, the team is now working to construct a 30-meter (98.4-foot) quantum link. See more over at ETH Zurich’s

0

AI Surges In Response to Pandemic

Spending on AI is poised to jump, particularly among enterprises that are deploying the technology...

Read More »

0

Cisco, Other Tech Firms Vow No Job Cuts

Cisco CEO Chuck Robbins said his company has the wherewithal to survive the pandemic without laying...

Read More »

0

Heavy Networking 511: A Wireless Upgrade Case Study

Today's Heavy Networking is all about wireless. Guest Bryan Ward, Lead Network Engineer at Dartmouth College, takes us through a campus-wide wireless upgrade that the institution is currently undertaking. We get nerdy about planning, infrastructure, cabling, and more, and dive into why the college is switching vendors.

0

Heavy Networking 511: A Wireless Upgrade Case Study

Today's Heavy Networking is all about wireless. Guest Bryan Ward, Lead Network Engineer at Dartmouth College, takes us through a campus-wide wireless upgrade that the institution is currently undertaking. We get nerdy about planning, infrastructure, cabling, and more, and dive into why the college is switching vendors.

The post Heavy Networking 511: A Wireless Upgrade Case Study appeared first on Packet Pushers.

0

Weekly Wrap: Vodafone Cut Costs 50% With VMware Telco Cloud

SDxCentral Weekly Wrap for April 10, 2020: Vodafone cut costs by 50% with VMware's Telco Cloud;...

Read More »

0

AWS Adds Direct Storage to ECS, Fargate

The move extends persistent data storage to containers running in the AWS ecosystem and targets the...

Read More »

0

BGP Hell Is Other People

If you configure a newsreader to alert you every time someone hijacks a BGP autonomous system (AS), it will probably go off at least once a week. The most recent one was on the first of April courtesy of Rostelecom. But they’re not the only one. They’re just the latest. The incidences of people redirecting BGP, either by accident or be design, are becoming more and more frequent. And as we rely more and more on things like cloud computing and online applications to do our daily work and live our lives, the impact of these hijacks is becoming more and more critical.

Professional-Grade Protocol

BGP isn’t the oldest thing on the Internet. RFC 1105 is the initial draft of Border Gateway Protocol. The version that we use today, BGP4, is documented in RFC 4271. It’s a protocol that has enjoyed a long history of revisions and a reviled history of making networking engineers’ lives difficult. But why is that? How can a routing protocol be so critical and yet obtuse?

My friend Marko Milivojevic famously stated in his CCIE training career that, “BGP isn’t a routing protocol. It’s a policy engine.” When you look at the decisions of Continue reading