So in the last blog I essentially looked at one of the most basic aspects of EVPN – a multi-site layer-2 network with nothing fancy going on, with traffic forwarding occurring between multiple sites in the same VLAN. The fact of the matter is that there was nothing going on there that you couldn’t do with a traditional VPLS configuration, however the general idea was to demonstrate the basics and take a look at the basic control-plane first.
In this update we’ll be looking at some of the more exclusive and highly useful aspects of EVPNs which make it a very attractive technology for things such as data-centre interconnect, there are a few things which are possible with EVPN which cannot be done with VPLS.
Consider the revised topology:

It’s the same topology from the first blog post, however I’ve simply added an additional VLAN (VLAN 101) to ge-0/0/22 of each EX4200 LAN switch, and an additional IXIA host.
For this post we’re going to look at a rather cool way of performing inter-VLAN forwarding between hosts in VLAN100 and VLAN101. Not that I want to spend time teaching people how to suck eggs, but generally in a simple network Continue reading
“Hey Fish, how good are you at BFD? None of my BFD neighbors will come up.” Two simple sentences and I am “hooked.” I love troubleshooting! Troubleshooting is just a blast for me! It’s like being a Network Detective trying... Read More ›
The post Network Detective Series: Troubleshooting Method Ride-A-Long appeared first on Networking with FISH.
Note: If you are a TL/DR type of person, let me give you the short answer to the title of the post: Yes! 
For everyone else, I will try my hardest to keep this as short as possible. I will include as many pictures and CLI screens as I think are needed to help answer the scalability question, and no more. While I entertained the idea of making two separate posts regarding scalability, I felt it best to keep it to a single post since AP(Access Point) to AP communication and layer 3 roaming are best explained together. My wife and friends will tell you that I can be long-winded. I apologize in advance.
Let me just start by saying that I work for Aerohive Networks. I have been an employee of Aerohive for about 3 months. In that time, I have learned a tremendous amount about the overall Aerohive solution and architecture. Prior to working for Aerohive, I worked for a reseller that sold for Cisco(to include Meraki), Aruba, and Aerohive. I wasn’t unaware of Aerohive, but let’s be honest for a minute. Aerohive doesn’t have a lot of information out there around how their various protocols work. This Continue reading
DigitalOcean's CTO, Simplivity's latest, and more.
The plan is to automate the WAN.
Staying relevant in a world of containers.
The open source platform could be used by commercial buildings.
The post Worth Reading: Radicalizing data collection appeared first on 'net work.
Being a collaborative player is critical.
Cumulus Networks has always strived to provide our customers with choice. And now, Cumulus Linux 3.0 has been refactored to make the user experience fun and easy … and at the same time bring you, even more choice:
Shrijeet Mukherjee (our fearless engineering leader) kicked off the Cumulus Linux 3.0 development cycle with this as our main goal — to offer even more choice to our customers. And then this happened…

So we took on the challenge of unifying the user experience across this sweeping range of hardware platforms and switch silicon without muting the unique prowess and feature richness of any of them.
How did we do this? By deploying the three dragons in our arsenal: ONIE, switchd and the Linux kernel itself (which is now better fed by Continue reading
This week on Packet Pushers we talk with two VMware NSX customers who’ve implemented NSX in production. We'll look at SDN use cases including microsegmentation and network virtualization.
The post Show 292: VMware NSX Customer Stories – Real-World SDN Use Cases (Sponsored) appeared first on Packet Pushers.